FlintshireMotorcycles 01352 759222
Menu

Workshop notes

A pre-ride check you can remember.

Build a quick routine around tyres, brakes, lights and fluids before the first miles of the day.

Start at the ground

Check both tyres while they are cold. Use the pressures for your motorcycle and load from its handbook or pressure label. Look around the tread and sidewalls for damage, bulges or embedded objects. An unexplained loss of pressure needs attention before the ride.

Work your way round the bike

Switch on the lights and indicators. Use a reflection or a second person to check the brake light with each brake control. Check the horn, mirrors and controls. With the engine off, inspect the chain if fitted and use the handbook for the correct slack and measuring position.

Look underneath

A fresh spot on the floor can be your first sign of a leak. Check fluid levels in the position and at the temperature specified in the handbook. If braking feels different, a tyre is losing air or fluid is escaping, leave the bike parked and arrange an inspection.

Finish with your kit

Clean the visor, fasten your helmet and close your jacket and gloves. Before choosing a route into the Welsh hills, check fuel range, weather and a suitable place to stop. A small problem is easier to deal with at home than on an exposed pass.

WhatsApp